Basic Micro RoboClaw 2x15A Motor Controller

$89.95

Basic Micro RoboClaw 2x15A

  • Wide range of sensor inputs
  • Absolute control over speed, velocity and direction
  • Optimum motor performance in open or closed loop modes
  • Lithium cutoff mode protecting batteries from damage

Description

The RoboClaw 2x15A motor controller by Ion Motion Control can supply two brushed DC motors with 15 Amps continuous and up to 30 Amps peak. With its multi mode interface it can be controlled from USB, RC radio, serial devices, analog and or microcontrollers such as an Arduino or Raspberry Pi. Dual quadrature encoders with up to 19.6 million pulses per second are supported. In addition, a wide range of sensor inputs including potentiometers and absolute encoders are supported. RoboClaw’s close loop functionality creates absolute control over speed, velocity and direction regardless of loading changes. At the heart of RoboClaw is a high performance motion control intelligence which achieves high precision control and optimum motor performance in open or closed loop modes. With RoboClaw’s synchronous regenerative capabilities it will charge a supply battery during slow down or breaking action. With it’s advance circuitry it can also change direction during full throttle without damage! RoboClaw also incorporates a lithium cutoff mode protecting batteries from damage.

As a synchronous regenerative motor controller RoboClaw will charge the attached battery during a slow down or breaking action. With the advance circuitry it can also change direction during full throttle without damage! RoboClaw also incorporates a lithium cutoff mode which protects your batteries from damage. Get the power to win your next robotics competition!

Features

  • 3.3V Safe Outputs
  • 5V Tolerant Inputs
  • Quadrature Encoders
  • Absolute Encoders
  • Encoder Auto Tune
  • Motor Channels x2
  • BEC5 – VDC @ 3Amp
  • Thermal Protection
  • Current Sense
  • Battery Protection
  • Regenerative Braking
  • Other Voltage Protection
  • Under Voltage Protection
  • Max Voltage 34 VDC
  • Min Voltage 6 VDC

Dimensions

L: 74mm x W: 52mm x H: 17mm

Additional information

USB

Yes

Analog

Yes

RS232

Yes

CAN Bus

No

RC Pulse

Yes

Configurable I/O

Yes

Scripting

No

Position Control Mode

Yes

Velocity Control Mode

Yes

Torque Control Mode

Yes

Motor Type

Brushed DC

Cooling

Top Side Heat Sink

Dimensions

L: 74mm x W: 52mm x H: 17mm

Weight

61 grams

Reviews

There are no reviews yet.

Be the first to review “Basic Micro RoboClaw 2x15A Motor Controller”

Your email address will not be published. Required fields are marked *

Post comment