Showing all 2 results

Sharebot SnowWhite Direct Laser Sintering DLS 3D Printer

Sharebot SnowWhite

  • SLS rapid printing system with double piston and powder recovery system.
  • CO2 laser with galvanometers.
  • Low consumption: 230V and less than 800W.
  • Touch screen display and USB gate. Wirelles connectivity.
  • Easy and intuitive to use.
  • Plug and Play: Only a few parameters must be set before you start.
  • Just a click to pass from a .STL file to machinary code.
  • Profiles for each kind of powder.
  • Hot print chamber
  • Regulated chamber and powder bed temperatures.
  • Low-level maintenance needed.
  • The printer doesn’t require periodic calibration while the laser doesn’t need any maintenance.
  • Print volume: 90mm x 90mm x 80mm.
  • The layer height can be changed from 0,04mm to 0,4mm depending on the powder.
  • Scan speed lower than 2.200 mm/sec.
  • Printing speed 35mm/h on the Z-axis.
  • Powder enclosed from suffering thermic stress.